trusine™ is the power control technology implemented within the immerSUN®. It is 4eco's proprietary control method, as the name suggests, the power being delivered to the load is kept as a true sine wave; only the voltage is varied.
This control method cannot be achieved using TRIACs and is much more difficult to design, requiring three times the number of components which slightly increases cost.
The benefits are instrumental in producing an EMC compliant device meeting all necessary standards and requirements to be sold within the UK and also globally.
Compliant with EN 61000-3-3 (voltage fluctuation and flicker): Will never cause lights to flicker
Compliant with EN 61000-3-2 (harmonic current emissions): Will never cause problems with inverters
Fully short circuit protected in case of load fault
Power factor correction
Soft starting to avoid power surges
Smart meter compatible
Compatible with all third-party energy monitors
Careful consideration needs to be given when choosing your controller. Saving money on the initial cost of the unit may be a false economy as problems could arise after installation. By choosing immerSUN with it's trusine™ power control technology, you can be assured of reliable, trouble free operation for many years.
When choosing your controller it is imperative that you ask to see the full EMC test report, to ensure that the device is compliant and will not cause you problems in the future with smart meter roll-out.